مدونة منذر اسامة

العودة   منتديات جريت بلينز العربية Great Plains For Arab > الأقــســـام الــعـــامــة > منتدى جريت بلينز العام

منتدى جريت بلينز العام يحتوي على المواضيع التي لا تنتمي الى التقسيمات أدناه. استعرض الأقسام الموجودة قبل كتابة موضوعك في هذا القسم.

إضافة رد
 
أدوات الموضوع انواع عرض الموضوع
قديم 11-Nov-2012, 09:03 AM   #1
bana_112
عضو جديد
 
تاريخ التسجيل: Jul 2007
المشاركات: 16
من مواضيعي  
افتراضي مطابقة ap مع gl

Ap موديول غير متطابق مع ال gl موديول، كيف يمكنني ان اعرف الحركات التي اثرت على احدهم ولم تؤثر على الاخر؟؟؟؟
bana_112 غير متواجد حالياً   رد مع اقتباس
قديم 12-Nov-2012, 01:22 PM   #2
sameh mohamed
عضو جديد
 
تاريخ التسجيل: Sep 2008
الدولة: الإمارات العربية المتحده
المشاركات: 12
إرسال رسالة عبر مراسل MSN إلى sameh mohamed إرسال رسالة عبر مراسل Yahoo إلى sameh mohamed
من مواضيعي  
افتراضي

في البداية واجهت هذه المشكلة والحمد لله قمت بمراجعة تاريخ الفاتورة وتاريخ الترحيل للقيود فمن الممكن أن تكون الفاتورة بتاريخ 01/07/2008 وتاريخ الترحيل بالباتش أو تاريخ البرنامج 01/11/2008 ثانيا من الممكن أن يكون توجيه القيد بالفاتورة به خطا وغير مربوط علي الحسابات الصحيحة
sameh mohamed غير متواجد حالياً   رد مع اقتباس
قديم 20-Dec-2012, 08:07 AM   #3
alnawrass
عضو نشيط
 
تاريخ التسجيل: Feb 2008
الدولة: UAE
المشاركات: 47
من مواضيعي  
افتراضي

أخ سامح من المزايا المفيدة جدآ في الاصدار العاشر من الـgp هو ميزة المطابقة بين الاستاذ العام و الموديول عن طريق برنامج الأكسل

هذه الميزه لم تكن متوفره في الاصدارات السابقه للأصدار العاشر
alnawrass غير متواجد حالياً   رد مع اقتباس
قديم 20-Dec-2012, 08:34 AM   #4
bana_112
عضو جديد
 
تاريخ التسجيل: Jul 2007
المشاركات: 16
من مواضيعي  
افتراضي

وكيف ذلك يا اخ alnawras؟
bana_112 غير متواجد حالياً   رد مع اقتباس
قديم 20-Dec-2012, 09:06 PM   #5
alnawrass
عضو نشيط
 
تاريخ التسجيل: Feb 2008
الدولة: UAE
المشاركات: 47
من مواضيعي  
افتراضي

اخي الفاضل اقرأ هذه الفقره من مرفق whats new in GP 10 يصف كيف يمكن عمل المطابقة بين الـ GL وAP وAR

Reconcile Receivables Management and Payables
Management to General Ledger

This reconcile process generates a Microsoft Excel spreadsheet that can be used to
match transactions in Payables Management or Receivables Management that have
been posted to General Ledger. While this process doesn’t generate correcting
transactions, if they’re needed, it can help identify transaction discrepancies
between balances in General Ledger and the sub-ledgers.
alnawrass غير متواجد حالياً   رد مع اقتباس
قديم 20-Dec-2012, 09:37 PM   #6
as_radwan
عضو مميز
 
تاريخ التسجيل: Nov 2007
المشاركات: 256
من مواضيعي  
افتراضي

اقتباس:
المشاركة الأصلية كتبت بواسطة alnawrass مشاهدة المشاركة
أخ سامح من المزايا المفيدة جدآ في الاصدار العاشر من الـgp هو ميزة المطابقة بين الاستاذ العام و الموديول عن طريق برنامج الأكسل

هذه الميزه لم تكن متوفره في الاصدارات السابقه للأصدار العاشر
ويمكن ابضا مطابقة الاستاذ العام مع موديل المخازن وخصوصا بعد إضافة نسخة sp2 للاصدار العاشر
__________________
هذا الموضوع عبارة عن بذرة تحتاج للنمو والتحسين؛ فساهم في إثرائه بالمشاركة فيه
[LEFT]Best Regards
Ahmed Ibrahim
I.T Manager
http://ahmedibrahim.net
Mobile: +2 010-3438385
Microsoft Certified Business Management Solutions Specialist for Microsoft Dynamics AX 2009,Dynamics CRM4,GP10
Microsoft Certified Business Management Solutions Professional Applications for Microsoft Dynamics GP10
MCTS: SQL Server 2005,Windows SharePoint Services 3.0
ITIL Foundation V3
as_radwan غير متواجد حالياً   رد مع اقتباس
قديم 28-Jan-2013, 06:06 PM   #7
saif79
عضو جديد
 
تاريخ التسجيل: Apr 2008
الدولة: Oman
المشاركات: 9
إرسال رسالة عبر مراسل AIM إلى saif79 إرسال رسالة عبر مراسل MSN إلى saif79
من مواضيعي  
افتراضي

اخي العزيز يمكنك الاستفادة من الكو التالي اللذي استعمله في شركتي لايجاد الفروقات لاكثر من 5000000 ترانساكشن وقد نجح.
للاستفار راسلني على saifatfairtradellc.com


--Bulid the subledger from pm20000 and pmpm30200
--drop table ft_it..pm20000bkp4_2210
select x.* into ft_it..pm20000bkp4_2210 from (
select voided,vendorid vendor,bachnumb,trxsorce sltrxsource,bchsourc slsource,doctype,vchrnmbr ,docnumbr ,docdate,docamnt slamt
from ftnew..pm20000 a where
vendorid in
(select distinct ormstrid from ftnew..gl20000 where openyear = '2007'
and actindx in (select actindx from ftnew..gl00100 where actnumbr_6 = '2210')
and ormstrid <> '')
and docdate between '01-apr-2007' and '31-mar-2008'
union all
select voided,vendorid vendor,bachnumb,trxsorce sltrxsource,bchsourc slsource,doctype,vchrnmbr ,docnumbr ,docdate,docamnt slamt
from ftnew..pm30200 a where
vendorid in (select distinct ormstrid from ftnew..gl20000 where openyear = '2007'
and actindx in (select actindx from ftnew..gl00100 where actnumbr_6 = '2210')
and ormstrid <> '')
and docdate between '01-apr-2007' and '31-mar-2008') x


--change the vchrnmbr to receipt no in the SL table
update ft_It..pm20000bkp4_2210
set vchrnmbr = a.poprctnm ,
doctype = 2
from ftnew..pop30300 a
where pm20000bkp4_2210.doctype = 1 and
a.poptype =2 and
docnumbr = vnddocnm and
docdate = receiptdate and
slsource = bchsourc and
vendor = vendorid and
a.vchrnmbr = pm20000bkp4_2210.vchrnmbr and
slsource = 'Rcvg Trx Ivc '

-- build the GL table
--drop table ft_it..gl20000bkp4_2210
select --jrnentry,
ortrxsrc,orctrnum as doc,ormstrid as GLvendor,--sourcdoc,
ortrxtyp,
sum(debitamt) dr, sum(crdtamnt) cr
into ft_it..gl20000bkp4_2210
from ftnew..gl20000
where openyear = '2007' and
ormstrid <> '' and orctrnum <> '' and
actindx in (select actindx from ftnew..gl00100 where actnumbr_6 = '2210')
group by --jrnentry,
ortrxsrc,orctrnum,ormstrid --,sourcdoc
,ortrxtyp



--build the comparision table
--drop table ft_it..gl20000pm20000bkp4_2210
select * into ft_it..gl20000pm20000bkp4_2210 from
(
select ortrxsrc as ortrxsrc1 ,doc as doc1 ,GLvendor as Vendor1,0 jrn,'' glsorce,0 dr1,0 cr1,'' void,'' slbatch,'' slsource1,
ortrxtyp as doctype1
,0 slamt1, 0 as SlTrueAmt
from ft_it..gl20000bkp4_2210
union
select sltrxsource as ortrxsrc1,vchrnmbr as doc1,vendor as vendor1 ,0 jrn,'' glsorce,0 dr1,0 cr1,'' void,'' slbatch,'' slsource1,
doctype as doctype1
,0 slamt1, 0 as SlTrueAmt
from ft_it..pm20000bkp4_2210
) x


update ft_it..gl20000pm20000bkp4_2210
set void = voided,
slbatch = bachnumb,
slsource1 = slsource,
doctype1 = doctype,
slamt1 = slamt
from ft_it..pm20000bkp4_2210
where ortrxsrc1 = sltrxsource and doc1 = vchrnmbr
and vendor1 = vendor and doctype1 = doctype


update ft_it..gl20000pm20000bkp4_2210
set --jrn = jrnentry,
--glsorce = sourcdoc,
dr1 = a.dr,
cr1 = a.cr
from ft_it..gl20000bkp4_2210 a
where ortrxsrc1 = a.ortrxsrc and doc1 = a.doc
and vendor1 = a.glvendor and doctype1 = ortrxtyp
--and date1 = GLDate



insert into ft_it..gl20000pm20000bkp4_2210
select ortrxsrc,orctrnum,ormstrid,jrnentry,'',--sourcdoc,
debitamt,crdtamnt,'','','', ortrxtyp,0,0
from ftnew..gl20000
where openyear = '2007' and
ormstrid = '' and orctrnum = '' and
actindx in (select actindx from ftnew..gl00100 where actnumbr_6 = '2210')


update ft_it..gl20000pm20000bkp4_2210
set SlTrueAmt = case doctype1
when '1' then -1 * slamt1
when '2' then -1 * slamt1
when '3' then -1 * slamt1
else slamt1
end


select * from ft_it..gl20000pm20000bkp4_2210
order by 3,doctype1,2,4
saif79 غير متواجد حالياً   رد مع اقتباس
قديم 28-Jan-2013, 08:01 PM   #8
bana_112
عضو جديد
 
تاريخ التسجيل: Jul 2007
المشاركات: 16
من مواضيعي  
افتراضي

شكرا يا اخ سيف ولكن ارجو التوضيح اكثر لو سمحت
bana_112 غير متواجد حالياً   رد مع اقتباس
قديم 28-Jan-2013, 09:12 PM   #9
Monzer Osama
مدير عام منتديات جريت بلينز العربية
افتراضي

اقتباس:
المشاركة الأصلية كتبت بواسطة saif79 مشاهدة المشاركة
اخي العزيز يمكنك الاستفادة من الكو التالي اللذي استعمله في شركتي لايجاد الفروقات لاكثر من 5000000 ترانساكشن وقد نجح.
للاستفار راسلني على saifatfairtradellc.com


--Bulid the subledger from pm20000 and pmpm30200
--drop table ft_it..pm20000bkp4_2210
select x.* into ft_it..pm20000bkp4_2210 from (
in
(select distinct ormstrid from ftnew..gl20000 where openyear = '2007'
and actindx in (select actindx from ftnew..gl00100 where actnumbr_6 = '2210')
and ormstrid <> '')
and docdate between '01-apr-2007' and '31-mar-
order by 3,doctype1,2,4
شكرا أخ سيف , أرجو منك وضع الكود في ملف نصي بالـ Notepad .txt وإرفاقه بردك على انه مرفق إذ أن طول المشاركة تعدت المسموح بها.
__________________
Monzer Osama
Saudia Arabia - Jeddah
00966501826235
Microsoft Certified Business Management Solutions Professional
Microsoft Certified Trainer

آخر تعديل بواسطة Monzer Osama ، 28-Jan-2009 الساعة 10:00 PM.
Monzer Osama غير متواجد حالياً   رد مع اقتباس
إضافة رد


يتصفح الموضوع حالياً : 1 (0 عضو و 1 ضيف)
 
أدوات الموضوع
انواع عرض الموضوع

ضوابط المشاركة
لا تستطيع إضافة مواضيع جديدة
لا تستطيع الرد على المواضيع
لا يمكنك اضافة مرفقات
لا يمكنك تعديل مشاركاتك

BB code متاحة
كود [IMG] متاحة
كود HTML معطلة

الانتقال السريع

المواضيع المتشابهه
الموضوع كاتب الموضوع المنتدى مشاركات آخر مشاركة
نظام مطابقة البنوك في جريت بلينز ezzat_sas الجزيئ المالي
(GL - AP - AR – BM - FA - AC ... ets.)
28 06-Aug-2012 03:01 PM


جميع الأوقات بتوقيت GMT +3. الساعة الآن 08:43 PM.


Powered by vBulletin® Version 3.8.3

الموقع والمنتدى من تطوير » شركة المنذر للاستضافة والتصميم

Copyright © 2000-2010 Jelsoft Enterprises Limited.
الموقع لا يمثل أي جهة رسمية بل هو جهد شخصي يرمي الى تجميع القدرات في برنامج جريت بلينز